ATRA TRANSMISSION REBUILD STANDARD STATEMENT
ASSOCIATION REBUILDING STANDARDS: CROWN TRANSMISSION IS A MEMBER OF ATRA AND IS COMMITTED TO THESE TRANSMISSION REBULD STANDARDS!
No member or person or firm shall represent that any reprocessed automatic transmission has been “rebuilt, according to ATRA specifications:, unless such transmission has been reprocessed in the following manner; and members further agree to extend nationwide, inter-shop warranty coverage only on such transmissions as have been reprocessed in the following manner:
All internal and external parts shall be dismantled and thoroughly cleaned and inspected, including the case and bell housing.
The following parts shall be replaced with new, each time; all lined friction clutch plates; all gaskets and rubber parts; metal sealing rings as are used in rotating applications; disposable type filters.
All bands as are used in dynamic applications shall be replaced with new or re-lined bands, each time.
The valve body shall be thoroughly cleaned and inspected; all dirt and varnish and foreign substances removed; all non-serviceable parts replaced, and new gaskets installed where applicable.
The torque converter shall be considered to be a part of the transmission; and any torque converter which is installed along with a rebuilt transmission shall be internally cleaned and inspected for wear; externally checked for leaks, cracks, weld failure and hub wear; and starter ring gear wear, where applicable. Any converter which is judged as not capable of delivering new converter performance and life shall be replaced with a new or rebuilt converter. Any converter which is installed along with a rebuilt transmission main body shall be guaranteed by the member along with the rest of the transmission.
Any and all other impaired, defective, or substantially worn parts which are not mentioned above, but which would not be expected to deliver new part performance, shall be restored to a sound condition, or replaced with new, rebuilt, or unimpaired used parts.